|
|
In order to go from one mode to another, the machine must come to a full stop. "If an operator pump flips the switch while he''s working, he will stay in the same mode until he comes to a stop," said Osborn. "Before he can actually go into the other mode, he hydraulic has to push the "press to operate button." There is also an indicator light on the switch so he can look up and have a visual display of which mode he''s in." The position sensors were provided by Torrington, a sister IR company, with all wire harnesses coming from Fargo Assembly and the steering mode switch is from Eaton. "Torrington worked very closely with Jason pump and our team," said Krause. "These are not off-the-shelf sensors. We told them what the sensors had to do, gave them the area they had to fit in and the conditions they had to live under. The wheel angle sensors and the wheel hydraulic speed sensors were developed from scratch as a joint effort between Bobcat and Torrington." "Backpack sprayers pump for agriculture are the biggest application currently, but the inventor wants to expand applications to food and pharmaceutical," says Richardson. "Being an engineer myself, I saw that the potential uses were very broad. Plant managers and engineers always want to tweak a valve, but because this has a pre-set pressure, it becomes tamper proof."The first application in the beverage arena is likely to be foodservice. Vendors are notorious for altering the syrup/carbonated water ratios in drink hydraulic dispensers, pump a practice that manufacturers abhor. Circle 103 on inquiry hydraulic card The Clean-Pak extended surface pump pocket filter is hydraulic made with a dual layer synthetic pump media. The pockets are formed by a sonic sealing process using ultra high frequency sound. It features a high burst strength to maintain hydraulic pocket integrity under high resistance or turbulent conditions. The pockets are mechanically crimped and chemically bonded to a pump rust-resistant, galvanized steel header. Airguard. Circle 104 on card The GVD Vent Damper solves the problem of heat loss and cold air infiltration through open vent pipes. When there''s a call for heat, the motorized damper automatically opens to allow natural draft during appliance operations. When the thermostat is satisfied, the damper closes. It is made of stainless steel and available in eight hydraulic sizes from 4-in. to 12-in. It operates with all 24 VAC, 60 hz intermittent ignition and standing pilot ignition systems. Field Controls.
|