|
|
* I use a 4.5-kilowatt portable welder with a Kohler motor for backup power at the house. It''s not quiet, and it uses too much fuel, but it works well.* I use a Generac 4-kilowatt gas generator to run a freezer, refrigerator, lights and to energize a fence during power outages. It''s just big enough to power a 2-horsepower air compressor.* I bought a 60-kilowatt diesel-powered lowspeedhydraulicpumps automatic generator in 1994 when we put up new hog lowspeedhydraulicpumps barns. Previously I had a 40-kilowatt PTO generator. Trouble was, it took 15 minutes to get a tractor going and everything hooked up. And we didn''t have an alarm system, so if nobody was home we were in trouble. The automatic setup, including a 400-amp transfer switch and other wiring, cost $20,000. Go-karts aren''t cheap; models cost between $700 and $1,200, which buys a well-made machine with performance and safety features. In conjunction with the Consumer Products Safety Commission, manufacturers developed standards for safety features that include shoulder harnesses, sprocket covers, guard rails and parental control keys to prevent kids from using the product without adult supervision.The bottom line with go-karts, though, is fun. For a lot of people it means zipping around lowspeedhydraulicpumps a spacious backyard or a vacant field in a go-kart capable of traveling at speeds approaching 30 mph. Chuck Brisrer, who is well known in the go-kart industry, recently left Karts International and formed his own company called Brister''s Design & Manufacturing Company (BDM) in Roseland, La. The backhoe has a powder-coat finish in bright red and yellow. Features include: heavy-duty, self-contained frame, standard 9 HP Briggs industrial motor, balloon tires, highway-rated tires, support legs, boom arms, specially shaped bucket for increased digging, replaceable teeth, four-spool control valve, and special hydraulic cylinders. Four models are available, two of which can be towed, and two can be attached to three point hitches. Options lowspeedhydraulicpumps include a choice of 9 or 12 ft. reach from boom pivot and buckets in a choice of 12 in. width for digging or an 8 in. width for trenching. Model BL70 backhoe, with 90-hp. engine, digs to depths of 14 1/2 ft. and lifts 7,619 lbs. Loader bucket holds 1.3 cu. yds. Cab boasts 360 [degrees] visibility. Choose from 2 backhoe control lever configurations. Spring-applied, pressure-released lock secures boom. Store tools, grease lowspeedhydraulicpumps guns, and chains in tool box integrated in left steps. Heavy-duty, single-piece chassis tapers at front for 55 [degrees] steering angle. Integral bucket-mounted flipover pallet forks, which measure 42 ins.
|