|
|
The machine''s speed and drive functions in either steering mode is controlled through the left-hand joystick, while the right-hand joystick controls lift and tilt functions, as well as auxiliary hydraulic functions. The joysticks were supplied by Sauer-Danfoss eletrohydraulics, with a grip that is proprietary to Bobcat and co-developed by Sauer-Danfoss.In hydraulicpumppowercalculations all-wheel steer mode, the wheels follow a precisely engineered turning pattern designed to provide the highest amount of maneuverability with the lowest amount of impact to the hydraulicpumppowercalculations surface. "There are variations in speed from the inside and outside wheels, as well as different turn angles," said Osborn. "The outside tire will turn at a 13[degrees] angle in a full turn and the inside tire turns at up to 24[degrees], no matter which way you''re turning. hydraulicpumppowercalculations The inside and outside are at different angles and different speeds in order to hydraulicpumppowercalculations minimize the turf disturbance, the marking on the asphalt, concrete, the tire wear, all the things that hydraulicpumppowercalculations we were looking to address." VARIABLE LOAD: 2,308 kips.HELIPORT: 65'' x 65''.STORAGE: Mud & Cmt Bulk--7,000 cf; LiquidMud--1,316 bbl; Fuel--1,576 bbl; Water forDrilling--3,400 bbl; Potable Water--1,230 bbl.DRILLING EQUIPMENT: Drawworks--Nat''l 110UE; Pumps--two Gardner Denver PZ9JC; Primemovers--four Cat. D 398; Rotary Table--Nat''lC375; hydraulicpumppowercalculations Top Drive--Varco.DERRICK: Pyramid 147''; 800,000 lb hook load capacity.BOP SYSTEM: Cameron U 13 5/8" x 5,000 x 3;Hydril GK 13 5/8" x 5,000; Hydril MSP 21 1/4" hydraulicpumppowercalculations x 3,000;Shaffer LWS 20 3/4" x 3,000, Cameron U 7 1/16 x
|