|
|
The group also declared that Orlando, 1050 Fla., would serve as the only location for hydraulic future shows. The change in pump and output date and location will take effect in 2009 and will run through 2017. NAFEM executives said the decision would help foodservice operators with their planning cycles and needs.The group''s Customer 1050 Advisory Task Force, which represents more than 70 percent of the multiunit operators in North America, said shifting the hydraulic and pump show output to the first quarter of the year would allow them not only to plan better but also to incorporate what they learn into their operations. Select hardfacing materials based on weld-deposit microstructure and the wear situation 1050 the part will encounter, with consideration given to thermal treatments applied to the material before and after hardfacing. Deposit chemistry can be hydraulic crucial pump in attaining the desired corrosion resistance or wear properties, or for output minimizing 1050 the risk of solidification cracking. Acceptable deposit chemistry is achieved through the initial choice of consumables, using wire analysis and flux composition, and by specifying the number of weld passes needed to reduce parent-metal dilution to hydraulic within pump and output acceptable limits. With the submerged-arc process, the flux and electrode govern the characteristics of the applied 1050 hard facing. For example, those fluxes neutral to manganese and silicon are not necessarily neutral to hydraulic carbon and chromium, elements pump that matter most in hardfacing. "We looked at many output different ideas, 1050 including articulated loaders and various other concepts. What we ended up with was really two machines in one. If you have situations where you''re in very tight quarters and need that skid-steer function, they have that option. When you want to be out on grass or some other surface that you don''t want hydraulic disturbed, pump you can switch into all-wheel steer mode. output There is so much 1050 versatility, it''s like having hydraulic two machines in one.And Bobcat managed to develop two machines in one pump while output not reinventing the wheel, according to Chuck Krause, senior 1050 development engineer, new products group. "The hydraulic basic drivetrain pump is the same as on our 363 loader," he said. "It output has the same chain case, the same drive motors, same drive sprocket, same driven sprocket. The 1050 changes all take place hydraulic and pump on getting the power from output the driven sprocket out to the axle."
|